HONMA

BERES

BERES U-05 Hybrid

TECHNOLOGY

Creating more accuracy with higher trajectory.

The shape is designed for accuracy.
The relatively low face progression and linear shaped leading edge enable players to easily aim at the target.
Unified load position design in which all clubs are arranged to the neck and face sides.
The unified load position with higher usability and powerful trajectories is adopted. Every loft ensures the same trajectories and feel.
Tungsten weight screws are arranged in optimum positions.
The tungsten weight screws allow the center of gravity to provide high trajectories and straight-line stability.

Shape design

The heel shape is rounded (following U-03) so that your club has better turf interaction from any lie.

The low center-of-gravity design with a unified load position

The low center-of-gravity design with a unified load position throughout the entire line brings about powerful and penetrating trajectories in the wind, reducing the loss of carry distance. At the same time, this allows you to hit balls at an exact carry distance by loft and aim with confidence.

Tungsten weight screws on the back side allow you to lift balls easily with high, straight-line stability.

Guide of choosing Fairway Wood,Utility,and,Iron

(Comparison between H/S 42m/s and …)

SPEC

Head material/Manufacturing process SUS630/Casting
Face material/ Manufacturing process High-Strength Custom Steel/Rolled
Shaft ARMRQ∞ 48, ARMRQ∞ 53, ARMRQ∞ 44
# (No.) U-19 U-22 U-25 U-28
Length(inches) 40.5 40.0 39.5 39.0
Loft (deg.) 19 22 25 28
Head volume(cm3) 138 137 137 137
Lie angle (deg.) 60.0 60.0 60.0 60.0
Distance to Center of Gravity(mm) 32.5 32.5 33.0 33.5
Height to Center of Gravity(mm) 22.5 23.0 23.5 24.0
Effective hitting area(mm) 12.5 12.0 11.5 11.0
Depth to Center of Gravity(mm) 27.5 28.5 29.5 30.5
Gravity Angle(deg.) 21.0 20.5 20.0 19.5
Swing weight・
Gross weight (g)
ARMRQ∞ 48 R D0・316 D0・320 D0・324 D0・328
SR D1・319 D1・323 D1・327 D1・331
S D1・320 D1・324 D1・328 D1・332
ARMRQ∞ 53 R D0・327 D0・331 D0・335 D0・339
S D1・331 D1・335 D1・339 D1・343
ARMRQ∞ 44 R C7・306 C7・310 C7・314 C7・318

Data refers to the 2S grade

Made in Japan

Picture is for right hand product.

Picture is for right hand product.

2S 3S 4S

SHAFT

ARMRQ∞ 48(Standard feature)
Material Carbon+eight-axisUD
Kick-point Low-Mid
Flex R,SR,S
Butt diameter (mm) U22 15.2
Tip diameter (mm) 8.6
# (No.) 19 22 25 28
Gross weight (g) R 44.5 44.0 43.5 43.0
SR 46.0 45.5 45.0 44.5
S 47.5 47.0 46.5 46.0
Torque (deg.) R 4.45
SR 4.40
S 4.35
Frequency (cpm) R 274 278 282 286
SR 282 286 290 294
S 290 294 298 302

Data refers to the 2S grade/shaft only

ARMRQ∞ 53
Material Carbon+eight-axisUD
Kick-point Mid
Flex R,S
Butt diameter (mm) 15.2
Tip diameter (mm) 8.6
# (No.) 19 22 25 28
Gross weight (g) R 50.0 49.5 49.0 48.5
S 53.0 52.5 52.0 51.5
Torque (deg.) R 3.75
S 3.65
Frequency (cpm) R 294 298 302 306
S 310 314 318 322

Data refers to the 2S grade/shaft only

ARMRQ∞ 44
Material Carbon+eight-axisUD
Kick-point Low
Flex R
Butt diameter (mm) 15.0
Tip diameter (mm) 8.6
# (No.) 19 22 25 28
Gross weight (g) 41.0 40.5 40.0 39.5
Torque (deg.) 5.40
Frequency (cpm) 239 244 249 254

Data refers to the 2S grade/shaft only

GRIP

ARMRQ∞ 48/ARMRQ∞ 53

ARMRQ∞ 44

Name BERES RubberⅢ
Material Rubber
Shaft ARMRQ∞ 48 ARMRQ∞ 53 ARMRQ∞ 44
Gross weight (g) 38 43 36.5
Size 60

Data refers to the 2S grade

PAGETOP